Who makes the best impeller?
#21
Registered
Join Date: Aug 2005
Location: sint maarten
Posts: 1,491
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who makes the best impeller?
i'm curious. impellers's are 20 bucks brand new from merc. they take 15 minutes to change. why wouldn't you just put a new one in every couple years or couple hundred hours like changing your oil or something ? why all this heartache over a nickle and dime part ? and you solve the " run dry " problem very simply.... don't run it dry. or if you have your head up your butt some day and do, you spend 20 bucks and 15 minutes and change it....
i don't see the big deal here. this sounds like the " i can get 203 shaves from my razor blade " days
i don't see the big deal here. this sounds like the " i can get 203 shaves from my razor blade " days
#22
Registered
Join Date: Oct 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
#23
Registered
Join Date: Oct 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
i'm curious. impellers's are 20 bucks brand new from merc. they take 15 minutes to change. why wouldn't you just put a new one in every couple years or couple hundred hours like changing your oil or something ? why all this heartache over a nickle and dime part ? and you solve the " run dry " problem very simply.... don't run it dry. or if you have your head up your butt some day and do, you spend 20 bucks and 15 minutes and change it....
i don't see the big deal here. this sounds like the " i can get 203 shaves from my razor blade " days
i don't see the big deal here. this sounds like the " i can get 203 shaves from my razor blade " days
THE 15MINUTE CLAIM IS A CONTINUOUS MEASURE FOR BENCHMARKING
PLEASE FEEL FREE TO EMAIL ME AT [email protected]
#24
Charter Member
Charter Member
What happens to the plastic housing atfter 5-10 minutes? Would it not be scored from the heat and ruined?
__________________
AUTOCONNECTIONLLC.COM
AUTOCONNECTIONLLC.COM
#26
OSO Moderator
Charter Member
I don't "think" they make blue impellors for 496's . . . .
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
#28
All I know is there has to be something better. I am on water pump number six this year. I have low water pick-ups; unfortunately, the water has been real low
Everytime, the housing has needed to be changed! A couple of the impellers looked perfect, but the end of the housing was scored. That end needs to definitely seal or the pump will not prime! I am tired of replacing $100 housings when the impeller is supposed to be the sacrificial part.
And 15 min change time... Not sure what boat that's on, but it must be wide open for access to the pump. Most are, at best, a chore...if not deserving of a severe cussing to the builder who would not think ahead about serviceability.
Everytime, the housing has needed to be changed! A couple of the impellers looked perfect, but the end of the housing was scored. That end needs to definitely seal or the pump will not prime! I am tired of replacing $100 housings when the impeller is supposed to be the sacrificial part.
And 15 min change time... Not sure what boat that's on, but it must be wide open for access to the pump. Most are, at best, a chore...if not deserving of a severe cussing to the builder who would not think ahead about serviceability.