Mirage conversion to ACCLERATOR
#1
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
MIRAGE PROP GO TO ACCLERATOR DESIGN
We have made our own changes to the Mirage prop and the Mirage Plus .
Our new design lets this prop plane out very quick with no blow-out holds great in the corners and allows you to trim Higher than normal for excellent lift creatiing massive accleration in Mid-Range and additional top speeds up to 3 mph.
call and ask for Darin on The ACCLERATOR!!!!!!!!!!!
Our new design lets this prop plane out very quick with no blow-out holds great in the corners and allows you to trim Higher than normal for excellent lift creatiing massive accleration in Mid-Range and additional top speeds up to 3 mph.
call and ask for Darin on The ACCLERATOR!!!!!!!!!!!
Last edited by HOUSTONPROP; 04-25-2004 at 06:00 AM.
#9
Registered
Join Date: Nov 2000
Location: charlotte Mi
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
I had my Mirages cut by Darin at Houston Prop and you would never know they were the same props....as soon as the ice is gone here I will be able to give them a test.....Thanks again Darin.
#10
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mikev
hey Darin just seeing if my prop showed up from ups yesterday for the repitch and accelerator upgrade.
hey Darin just seeing if my prop showed up from ups yesterday for the repitch and accelerator upgrade.
YES,IT'S HERE STANDARD QSS PROP,Thanks we have all the info and will keep you informed,looking at 2 wks.
Thanks Darin M.
Last edited by HOUSTONPROP; 03-04-2004 at 02:52 PM.