Alpha hinge pins
#2
Registered
Join Date: Oct 2000
Location: Wilmington,De,USA
Posts: 813
Likes: 0
Received 0 Likes
on
0 Posts
You can buy the tool from Merc (9/16" 12 point allen) or use a regular 9/16" allen wrench. You may need a little heat where they thread into the "bell" housing to break the loctite loose. Oh yeah, it's easier if the drive is still in place when you break them loose.
#4
Registered
Join Date: Jan 2004
Location: Saint Petersburg Fl
Posts: 1,571
Likes: 0
Received 0 Likes
on
0 Posts
I would recomend you buy the tool. It is cheap and makes it lots easier. I have had to heat them slightly when I have done them in the past. Not too much heat though, aluminum can fool you and be getting way hotter than you think.