Bravo Drives
03-28-2004, 03:18 PM
#1
Bravo Drives
Do bravo drives live longer spinning one direction vs the other? Setting up triple engine boat and wondering which way to spin the center drive. I'm running 1.36:1 ratio probably spinning 32P Bravo1's all on Imco extension boxes, 2"short lowers. Thanks for any help.
03-28-2004, 06:26 PM
#2
Registered
Join Date: Nov 2003
Location: Fairhaven Ma
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Kind of goes both ways.See alot of both RH and LH stock drives let go. But it may live a little longer swinging a RH prop on the center (don't know though what Hustler does w/ rotation). Race towers and billet caps will help.
03-28-2004, 09:28 PM
#4
Platinum Member
Platinum Member
Top cap upgrades pretty much even the field.
Most centers are RH cause props are cheaper. No need to spin 2 "extra cost" props. Boat's weight distribution will be set up for one direction or the other. A change will require redistributing some weight.
Most centers are RH cause props are cheaper. No need to spin 2 "extra cost" props. Boat's weight distribution will be set up for one direction or the other. A change will require redistributing some weight.
03-29-2004, 09:00 AM
#5
Offshore Cowboy
Platinum Member
Top Caps
Originally posted by mcollinstn
Top cap upgrades pretty much even the field.
Most centers are RH cause props are cheaper. No need to spin 2 "extra cost" props. Boat's weight distribution will be set up for one direction or the other. A change will require redistributing some weight.
Top cap upgrades pretty much even the field.
Most centers are RH cause props are cheaper. No need to spin 2 "extra cost" props. Boat's weight distribution will be set up for one direction or the other. A change will require redistributing some weight.
