bell housing hinge pins
04-07-2004, 09:03 PM
#11
Charter Member
You guys overrate the Merc tools too much. 
The 1/2" allen socket worked perfect. Nice and snug. Everything looked like new. The bellhousing threads would have pulled way before the socket wrench would have rounded out the stud.
Thanks
The 1/2" allen socket worked perfect. Nice and snug. Everything looked like new. The bellhousing threads would have pulled way before the socket wrench would have rounded out the stud. Thanks
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
VIP Member
04-08-2004, 08:28 AM
#14
Registered
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by US1 Fountain
You guys overrate the Merc tools too much. The 1/2" allen socket worked perfect. Nice and snug. Everything looked like new. The bellhousing threads would have pulled way before the socket wrench would have rounded out the stud.
Thanks
You guys overrate the Merc tools too much.
The 1/2" allen socket worked perfect. Nice and snug. Everything looked like new. The bellhousing threads would have pulled way before the socket wrench would have rounded out the stud. Thanks
I've torched them and banged on them with an impact wrench befor they've come loose. An allen wrench would never survive that.
Gary
