Go Back   Offshoreonly.com > Technical > General Q & A


OSO Sponsor
NorTech
OSO Sponsor

Advertiser

Advertiser


Reply
 
 
 
 
Thread Tools
Old 05-05-2004, 09:24 PM   #1
VIP Member
VIP Member
 
cig28's Avatar
 
Join Date: Mar 2004
Location: n.j
Posts: 258
1979 mirage 9m-ss
hyd steering

just installed hyd steering do i have to bleed the system , what kind of fluid ATF ? do i run the engine and add fluid or run it turn it off and add fluid run it turn it off and add fluid etc..............
cig28 is offline   Reply With Quote
Old 05-05-2004, 09:41 PM   #2
Registered
 
Elite Marine's Avatar
 
Join Date: Aug 2002
Location: IL
Posts: 5,531
Run the engine on, hose of course, keep turning the steering fully in one direction and then the other keep adding fluid as the system draws it in. Its easier with 2 people.

If you still have air, do a search on the board, there are several very good procedures on here for more complex bleeding.
Elite Marine is offline   Reply With Quote
Sponsored Links
 
 
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
hyd. steering ?s showtime83 General Q & A 0 06-04-2008 05:40 PM
Full Hyd vs Mechanical0-Hyd steering Pros & Cons Rage General Q & A 14 10-10-2005 12:20 PM
hyd steering cig28 General Q & A 0 05-07-2004 12:41 PM
hyd steering cig28 General Q & A 2 05-07-2004 01:43 AM
HYD. Steering strapman General Q & A 4 04-30-2002 09:55 PM


All times are GMT -5. The time now is 05:43 PM.


Copyright 2011 OffShoreOnly. All rights reserved.

Search Engine Optimization by vBSEO 3.2.0