fund razor

Currently looking for a 21" tie bar to connect OMC cobra drives. Boat still has (intact) brackets on inner drive trim ram ends. Would like to replace missing bar.

Checked Eddie Marine (overkill, and need to use their brackets)

Also checked Marine Machine or Machine Marine? Anyway, same deal.

Was hoping to get a stainless bar that would attach to my existing brackets and not have to start over. The attachment style looks like one slot and one hole on each bar end.
(Pin in slot must allow pivot, while nut/bolt secures bar).

I'll post a pic of the brackets when I get home from work on the off chance somebody recognizes the bracket set up.

In the meantime I guess I'm asking for additional ideas of where else to search.

Thanks.

Gary Anderson

I had one made once. Bought 1" S/S solid bar, had the ends tapped. Bought S/S heim joints from CP.
Gary

Andy

I also have King Cobras, what boat do you have? I have a 1984 Formula 302.

fund razor

The one with the OMCs is a Chris Craft Stinger 260.

When I had time to take a pic it was pouring.

I might fall back on making one up.
I know what S/S heim joints are...What's "CP"?

Thanks.

Audiofn

CP= CP Performance.

Jon

fund razor

Roger that Jon, thanks.

cuda

I bought one for my 242 alpha's from WPM. Around $300.

WILDTHING TAZ

I Make All The Steering For B-max. Including Tie Bars. Call Me I Think Have What You Need In Stock. Ron Bender 216-390-1330

P Offshore

I have several tie bars in the shop Email the pick and we will see if I have one to fit.
If not I have a couple of long ones that could be cut and modified.

fund razor

Ok, sorry it took a couple days. This is my busy season,even if I didn't have boats.

Here's the bracket: