Excessive throttle pumping required to start
#21
Registered
Join Date: Jan 2004
Location: Long Island NY.
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Re: Excessive throttle pumping required to start
There are two well plugs below the main jets on a Quadrajet that leak. This is a well known problem. Rebuild kits even came with a foam block that you put in to stop the leak. The fix is to remove the throttle plate assy, and you will see the two plugs sticking down. Smear a good epoxy (Like JB Weld) on them, let it dry, and reassemble.
It's that easy.
It's that easy.