Endplay in an Alpha drive prop shaft
08-16-2004, 08:17 PM
#1
Registered
Thread Starter
Join Date: Apr 2003
Location: Glenside, PA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Endplay in an Alpha drive prop shaft
I was out in the river with a friend's brand new bowrider the other night. First time out we hit something and sheared two blades clean off at the hub. Replaced the prop but there seems to be 1/8 to 1/4 of endplay front to back in the prop shaft. Seems like something else is wrong but not being familiar with Alpha drives I figured i'd ask.
Thanks
Bill
Thanks
Bill
