496 block, What head will fit.
#1
Team Dysfunctional
Charter Member
Thread Starter
Join Date: Jan 2001
Location: Bolton Landing NY
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
496 block, What head will fit.
I have had a 496 block out of a fleet truck with only 10K miles on it when it got a knock from a faulty lifter. I would like to build a motor for the wife to put in a hot rod she wants me to build. I would like to use this block but I want to make it N/A and get away from the factory fuel injection. What I was wondering was do heads from a gen V block fit on the new 496. Or where can I get an intake manifold to adapt to the new style heads that would let me use a standard type distributer and carb.
thanks
Pual
thanks
Pual
__________________
If it aint broke .... I can break it....
If it aint broke .... I can break it....
#3
Team Dysfunctional
Charter Member
Thread Starter
Join Date: Jan 2001
Location: Bolton Landing NY
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
Re: 496 block, What head will fit.
Please dont tell me no one can answer this question
__________________
If it aint broke .... I can break it....
If it aint broke .... I can break it....
#4
VIP Member
VIP Member
Re: 496 block, What head will fit.
The only aftermarket intake and heads I've seen
have been from Raylar.
But the intake is for fuel injection
I've seen a Raylar post on here......maybe the'll chime in.
jt
have been from Raylar.
But the intake is for fuel injection
I've seen a Raylar post on here......maybe the'll chime in.
jt
#6
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
Re: 496 block, What head will fit.
Hot Boat:
The only heads that will fit your 496 block are the stock factory 496 (8.1) GM iron heads or our new aluminum BigPower heads. As for a carburator manifold that will accept a distrbutor, we have a protype we are testing now and the final product should be available in October. Hope this helps, if you have any other questions, you might want to visit our website at Raylar.
Ray @ Raylar
The only heads that will fit your 496 block are the stock factory 496 (8.1) GM iron heads or our new aluminum BigPower heads. As for a carburator manifold that will accept a distrbutor, we have a protype we are testing now and the final product should be available in October. Hope this helps, if you have any other questions, you might want to visit our website at Raylar.
Ray @ Raylar