TOO LOUD !!!!! possible inexpensive fix
#22
Registered
Join Date: Dec 2000
Location: Lake St. Clair
Posts: 935
Likes: 0
Received 0 Likes
on
0 Posts
Re: TOO LOUD !!!!! possible inexpensive fix
Here's a pic of the bolt-under (1993+) style platform. Mine had the same cracking issues that Troutly mentioned, the whole seam at the bottom of the pic was blown out.
#23
Charter Member # 1083
Charter Member
Join Date: Feb 2001
Location: BACK HOME AGAIN IN INDIANA
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Re: TOO LOUD !!!!! possible inexpensive fix
You can have the Silent Thunder box off my 93 Formula 303 if you pay for the shipping. This is the type that bolts onto the bottom of the swim platform. It's heavy.
The boats for sale so, I don't think I'll need it.
Bob
The boats for sale so, I don't think I'll need it.
Bob
__________________
If it's not a thunder run.............than you're just burnen fuel!!!
If it's not a thunder run.............than you're just burnen fuel!!!
#24
Registered
Thread Starter
Join Date: Jun 2002
Location: Seneca Lake
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Re: TOO LOUD !!!!! possible inexpensive fix
Good info - thanks all - however i went and bought the rubber 90's and stainless T-bolt clamps like Troutly did -- i bought at the truck parts shop like he said to -- and at the same price - $50 for a single engine set-up -- nice stuff -- thanks Troutly
Our club had a meeting last month (SPBA) and we discussed the NYS law - very confusing -- it appears that our non-motor head politicians passed a law for exhaust by copying a law about cut-outs on the old hotrods -- for you young guns, cutouts were holes cut in stock exhaust systems (or even systems with headers) ahead of the mufflers - when you wanted to race or just be cool you opened a slide gate or such to dump the exhaust
Well it appears that our NYS politicians figured all we need to do is copy that, and waaa laaah !!!! -------- dumb Ss&%$'s
so our law reads that we can not have any type of cut-outs or by-passes on our exhaust systems -- even though the by-passes that we have direct the exhaust thru the prop to quiet the bi#*^'s down at idle --
like i said before - a club member with a cruiser, who is well under 90 dB, got a ticket from a just trained deputy because he had silent choice -- gotta love it !!!!
it would make more sense if they eliminated all the BS about the cutouts and just state that you have to be = to or < than 90 dB at idle +/- 3% error.
Our club had a meeting last month (SPBA) and we discussed the NYS law - very confusing -- it appears that our non-motor head politicians passed a law for exhaust by copying a law about cut-outs on the old hotrods -- for you young guns, cutouts were holes cut in stock exhaust systems (or even systems with headers) ahead of the mufflers - when you wanted to race or just be cool you opened a slide gate or such to dump the exhaust
Well it appears that our NYS politicians figured all we need to do is copy that, and waaa laaah !!!! -------- dumb Ss&%$'s
so our law reads that we can not have any type of cut-outs or by-passes on our exhaust systems -- even though the by-passes that we have direct the exhaust thru the prop to quiet the bi#*^'s down at idle --
like i said before - a club member with a cruiser, who is well under 90 dB, got a ticket from a just trained deputy because he had silent choice -- gotta love it !!!!
it would make more sense if they eliminated all the BS about the cutouts and just state that you have to be = to or < than 90 dB at idle +/- 3% error.
Last edited by VP; 11-19-2004 at 05:15 PM.
#25
Registered
Thread Starter
Join Date: Jun 2002
Location: Seneca Lake
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Re: TOO LOUD !!!!! possible inexpensive fix
I installed Troutly's $50 rubber mufflers --- they seem to work well but the proof is in the dB readings!
Carney is going to measure my sound level this weekend and I will report back the results - i will get a picture too of the set-up -- simple deal
Carney is going to measure my sound level this weekend and I will report back the results - i will get a picture too of the set-up -- simple deal
#26
VIP Member
VIP Member
Re: TOO LOUD !!!!! possible inexpensive fix
For $50.00 I'll take a shot in the dark and orderd me up a set!!!
__________________
Gary H...
Gary H...
#27
JC Performance Engines
Gold Member
Re: TOO LOUD !!!!! possible inexpensive fix
you'll never notice them under a swim platform, but what about hanging off the back of the transom?
#28
VIP Member
VIP Member
Re: TOO LOUD !!!!! possible inexpensive fix
I have a swim platform off the back of my boat plus the hull is black...doesn't get any better than that for me anyway. Im not going to put them on till I get hasseled but will carry them on board.
__________________
Gary H...
Gary H...
#29
Registered
Thread Starter
Join Date: Jun 2002
Location: Seneca Lake
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Re: TOO LOUD !!!!! possible inexpensive fix
If you need something that looks better than black elbows, i think it is Gibson that offers the polished SS Sweep that are rather long, to reach down into the water from the higher mounted exhausts.
More than $50 though
More than $50 though