502 crankshaft questions
#1
Registered
Thread Starter
Join Date: Apr 2004
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
502 crankshaft questions
Self admitting rookie again.
Can a 502 gen 5 crank be used in a gen 6 block?
If they are different can the gen 5 be adapted?
Does a gen 5 have a one piece seal?
Is a 2000 502 mag mpi a gen 6 motor?
Does this 502 mpi have a roller cam as stock?
Thanks for any help.
You have an awesome site here.
Can a 502 gen 5 crank be used in a gen 6 block?
If they are different can the gen 5 be adapted?
Does a gen 5 have a one piece seal?
Is a 2000 502 mag mpi a gen 6 motor?
Does this 502 mpi have a roller cam as stock?
Thanks for any help.
You have an awesome site here.
#3
Platinum Member
Platinum Member
Join Date: Oct 2002
Location: DFW, Texas
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Re: 502 crankshaft questions
2000 is a Gen VI. I think anything after 1997 is. Gen V form about 1991 and Gen VI from about 1996.
The crank is the same in a Gen V and VI and they do use a one piece seal.
Gen VI got roller lifters
I also agree with RLW on Dennis Moore's book. I have it just for sh|t's and giggles and it's pretty dang good for BBC 101. Oop's, I gave up my secret!!
The crank is the same in a Gen V and VI and they do use a one piece seal.
Gen VI got roller lifters
I also agree with RLW on Dennis Moore's book. I have it just for sh|t's and giggles and it's pretty dang good for BBC 101. Oop's, I gave up my secret!!