Who makes these external steering brackets?
#1
Registered
Thread Starter
Join Date: Jun 2004
Location: Ft. Lauderdale, FL
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Who makes these external steering brackets?
Need some help to identify these brackets. They are about 10" long, boxed-in, angled and were attached to MM steering rams, but I am fairly sure they are not from MM. They are used in conjunction with a drive ext box.
Thanks for the help E.S.
Thanks for the help E.S.
#2
Charter Member #232
Charter Member
Re: Who makes these external steering brackets?
Why do you think that they are not MM units? They look like them to me.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#3
Registered
Thread Starter
Join Date: Jun 2004
Location: Ft. Lauderdale, FL
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who makes these external steering brackets?
Originally Posted by Audiofn
Why do you think that they are not MM units? They look like them to me.
Jon
Jon
Thanks E.S.
#4
Charter Member #232
Charter Member
Re: Who makes these external steering brackets?
They look like the MM ones that I used to have for #5 drives that were on stand off boxes.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#5
Registered
Thread Starter
Join Date: Jun 2004
Location: Ft. Lauderdale, FL
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who makes these external steering brackets?
Originally Posted by Audiofn
They look like the MM ones that I used to have for #5 drives that were on stand off boxes.
Jon
Jon
Thanks E.S.
#6
Charter Member #232
Charter Member
Re: Who makes these external steering brackets?
Not much unfortunatly. I gave mine away.....
__________________
Put your best foot forward!
Put your best foot forward!
#7
Registered
Thread Starter
Join Date: Jun 2004
Location: Ft. Lauderdale, FL
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who makes these external steering brackets?
Originally Posted by sutphen30
they look exactly like the marine machine brackets i have for my steering with stand off boxes.when i bought mine used,i payed $250/pair,3 yrs ago.for peoples who are thinking of buying for stand off boxes,,you'll need to get mm's longer rams for the twin engine combo.if you look in the sutphen section,i have pics of the back of my boat in there.
Saw the pics, verynice ride. You have the 6" brackets. These are the 12" ones so they should be fine for a twin set-up. Thinks for the feedback.
TooOld
I will give you a call within the hour, just need to get out the door and on the road first.
Thanks,
Eric
#8
Registered
Thread Starter
Join Date: Jun 2004
Location: Ft. Lauderdale, FL
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who makes these external steering brackets?
Originally Posted by Audiofn
Not much unfortunatly. I gave mine away.....
Thread
Thread Starter
Forum
Replies
Last Post
SmallPP
General Q & A
1
08-07-2007 09:23 PM
totalmp
General Boating Discussion
5
11-30-2004 09:09 PM