Big inch small blocks?
01-19-2005, 08:17 AM
#21
Registered
Re: Big inch small blocks?
Originally Posted by twinn29
Laz- was this motor for a boat???............doug
01-21-2005, 06:53 PM
#23
Registered
Join Date: Oct 2001
Location: Lake Norman, N.C.
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
Re: Big inch small blocks?
I was at the dyno shop last weekend and they had a fuelie small block with nitros and a supercharger that made over 2000hp. It looked trick and I am sure it made some serious power. They also build radical big cube motors (706) with over 3000hp that go in pro stock drag cars. Very impressive high dollar stuff. The motor they were dynoing was a friend of mines. 540 with a 1071 blower making 1066hp at 6200rpm. Not to shabby either. This shop is near Sparatanburg, SC
01-21-2005, 10:23 PM
#24
Registered
Join Date: Mar 2002
Location: Irish Hills, Michigan
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Re: Big inch small blocks?
someone around here is running a 434 that i heard pegged the needle at 1000+, though i don't believe he runs that power on a regular basis that i know of, runnin in an 18 foot boat... 
so just how MUCH duration can you get away with a big inch sbc and aftermarket WATER cooled exhaust that isn't dumping right at the tips?
Root
so just how MUCH duration can you get away with a big inch sbc and aftermarket WATER cooled exhaust that isn't dumping right at the tips?
Root
Last edited by jaroot; 01-21-2005 at 10:37 PM.
01-22-2005, 05:37 AM
#25
Re: Big inch small blocks?
My 408" has Comp Cams solid roller .625 int. .631 ex. [email protected] 112 cl . I run Gil Wet exhaust that exits below the water line.Never any reversion with this setup.
Rob
Rob
01-22-2005, 10:21 AM
#26
Registered
Join Date: May 2004
Location: Long island
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
Re: Big inch small blocks?
Does anybody remember the 30' SuperBoat RC Marine?? Boat ran awesome with small blocks. Beat everything in its class for many years. Who built those motors?
