Go Back  Offshoreonly.com > Technical > General Q & A
Prop Question >

Prop Question

Notices

Prop Question

Thread Tools
 
Old 02-26-2005, 01:57 PM
  #1  
Registered
Thread Starter
 
DORaymond's Avatar
 
Join Date: Oct 2004
Location: Long Island, NY
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Default Prop Question

Guys - I have a 1988 Cig Bullet with 502 Mags. I picked the boat up late last season. Port engine has always run faster than the starboard and I assume that the slower engine is just getting tired. I have the drives now off in the garage and I notice that the prop on the slower engine is a 25P Mirage PLUS, while the faster engine has s 25P Mirage. I know the pitch is the same, but the props look slightly different in design. Could this be the problem? I would hate to buy new props to find that it is not even though they don't exactly match.

Thanks for your help, Don.
DORaymond is offline  
Old 02-26-2005, 02:09 PM
  #2  
Registered
 
Join Date: Dec 2002
Location: MO
Posts: 239
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Prop Question

How much RPM difference?
NOBODY is offline  
Old 02-26-2005, 05:51 PM
  #3  
Registered
Thread Starter
 
DORaymond's Avatar
 
Join Date: Oct 2004
Location: Long Island, NY
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Prop Question

There is about 400 RPM difference which is enough to have to run the throttles with one advanced about 1/2" in front of the other
DORaymond is offline  
Old 02-26-2005, 06:17 PM
  #4  
Registered
 
Join Date: Dec 2002
Location: MO
Posts: 239
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Prop Question

The same size prop shouln't have that much diff.
I would check the motor.
Check comp. first.
Then check timing, fuel, codes, ect.
Check leakdown if you have the tool.
I have worked on alot of these motors with clogged injectors, they will idle with no miss and pick up a miss under load.
If they are clogged try to take them to a local injector cleaning machine. You have to take them out to do this.
NOBODY is offline  
Old 02-26-2005, 06:25 PM
  #5  
Registered
 
Join Date: Oct 2002
Location: New Orleans,La.
Posts: 983
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Prop Question

Call your local Merc.dealer and ask or call Merc. Racing 1.920.921.5330 Don't start taking things apart until you get some answers about the props.They don't have different part numbers for nothing.You didn't mention anything about a miss so unless you're bored or need the practice be patient and ask questions.BOB
Bob280Silencer is offline  
Old 02-26-2005, 06:27 PM
  #6  
Platinum Member
Platinum Member
 
SeaRay Jim's Avatar
 
Join Date: Oct 2002
Location: DFW, Texas
Posts: 1,053
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Prop Question

In '88 where there EFI/MPI 502's? I thought they were carbed.

What is the difference in the props? I'd want to run them wiht identical props, if there is a difference in the Plus and standard.
SeaRay Jim is offline  
Old 02-26-2005, 06:36 PM
  #7  
Registered
 
Join Date: Dec 2002
Location: MO
Posts: 239
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Prop Question

Originally Posted by SeaRay Jim
In '88 where there EFI/MPI 502's? I thought they were carbed.

What is the difference in the props? I'd want to run them wiht identical props, if there is a difference in the Plus and standard.
Sorry read right past that.
If it has bravo's you could switch the props around, run the drives in reverse and see if you have the same diff. If so then go back to orig. post - the efi part.
NOBODY is offline  
Old 02-26-2005, 06:48 PM
  #8  
Offshoreonly Advertiser
Offshoreonly Advertiser
iTrader: (2)
 
DiamondPerformance's Avatar
 
Join Date: Oct 2002
Location: De.
Posts: 1,358
Received 32 Likes on 22 Posts
Default Re: Prop Question

The Mirage plus has more cup and blade area.
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123

The Best Parts & Service At The Best Price
DiamondPerformance is offline  
Old 02-26-2005, 07:16 PM
  #9  
Platinum Member
Platinum Member
 
SeaRay Jim's Avatar
 
Join Date: Oct 2002
Location: DFW, Texas
Posts: 1,053
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Prop Question

Originally Posted by DIAMONDPERFORMANCE
The Mirage plus has more cup and blade area.
Bingo, I think we just found your 400 RPM????
SeaRay Jim is offline  
Old 02-26-2005, 09:45 PM
  #10  
Registered
Thread Starter
 
DORaymond's Avatar
 
Join Date: Oct 2004
Location: Long Island, NY
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Prop Question

Nobody - Good idea, swicthing the props and running the drives backward would tell right away.

SearayJim - the engines are 2000's 502 MAG MPI's - blew the 1988 454's a long while back. Of course, they were originally carb'd.

Thanks again for the help
DORaymond is offline  


Quick Reply: Prop Question


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.