Custom Engraving and CNC Machining
03-26-2005, 05:48 PM
#1
Registered
Thread Starter
Join Date: Feb 2005
Location: long island, newyork
Posts: 2,551
Likes: 0
Received 2 Likes
on
2 Posts
Custom Engraving and CNC Machining
the availability of custom engraving, machining, or fabrication is at your finger tip's. just finished a few trial attempt's at the engraving process on the c.n.c . did some number's for a set of billet air cleaners for weber carbd. also made an effort at a really trick steering wheel hub cover.
any one else have some idea's ?
any one else have some idea's ?
03-26-2005, 05:53 PM
#2
Registered
Re: Custom Engraving and CNC Machining
Originally Posted by monstaaa
the availability of custom engraving, machining, or fabrication is at your finger tip's. just finished a few trial attempt's at the engraving process on the c.n.c . did some number's for a set of billet air cleaners for weber carbd. also made an effort at a really trick steering wheel hub cover.
any one else have some idea's ?
any one else have some idea's ?
03-26-2005, 08:39 PM
#7
Registered
Thread Starter
Join Date: Feb 2005
Location: long island, newyork
Posts: 2,551
Likes: 0
Received 2 Likes
on
2 Posts
Re: Custom Engraving and CNC Machining
Originally Posted by customryder
can some one make me a center for this wheel ? i would like the Hustler logo on it.
VIP Member
03-27-2005, 11:05 AM
#9
Registered
Thread Starter
Join Date: Feb 2005
Location: long island, newyork
Posts: 2,551
Likes: 0
Received 2 Likes
on
2 Posts
Re: Custom Engraving and CNC Machining
heres a canopy glass retainer desighned to spec, and going to fountain power boats for the new 42 sitdown.
Last edited by monstaaa; 09-21-2007 at 08:17 PM.
03-27-2005, 11:07 AM
#10
Registered
Thread Starter
Join Date: Feb 2005
Location: long island, newyork
Posts: 2,551
Likes: 0
Received 2 Likes
on
2 Posts
Re: Custom Engraving and CNC Machining
a bmw m3 strut tower brace. designed in house, for there is not a structurally sound one in existence
Last edited by monstaaa; 09-21-2007 at 08:17 PM.
