whats the max hp a ssm#3'a will handle?
#1
Registered
Thread Starter
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
whats the max hp a ssm#3'a will handle?
was wondering what the max power a ssm#3'a will handle in a heavy boat (29 35ft mistress)? they a fresh 1.5 to 1 ratio.
thx for your input, ratman
thx for your input, ratman
#3
Registered
Thread Starter
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
Re: whats the max hp a ssm#3'a will handle?
i think merc rates them for 750 but then they rate #6's at 1000 but the 6's will handle much more. so how much more than 750 can the 3a's actually handle?
#4
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: whats the max hp a ssm#3'a will handle?
Depends on if it has the net forged upper gears, the older spiral gears are marginal at 750. With net forged 800 is pretty safe, have done 1000 ( @6200 RPM, the torque matters ) with experienced driver no problem.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Thread
Thread Starter
Forum
Replies
Last Post
timucin
General Boating Discussion
12
07-08-2002 12:05 PM