Need Stainless???
12-09-2008, 05:24 PM
#1
Registered
Thread Starter
Join Date: Sep 2007
Location: GLOC, Ok
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Need Stainless???
Just figured I would throw up a quick post to inform everyone that if you need any stainless parts manufactured let me know. Im back with my old company, where we specialize in stainless tubing parts for the automotive industry. We do work for the like of Toyota and Polaris. I want to get more involved in the marine industry, so I figured I would start here. We have pretty much any kind of tubing or plate manufacturing equipment in house, lasers. punches, brakes, benders, roll formers, you name it, we got it. The only thing that we dont do in house is machine work, but I have some pretty good outlets for that as well. So if you guys need anything let me know.
Eric
[email protected]
Eric
[email protected]
12-09-2008, 10:23 PM
#4
Registered
Thread Starter
Join Date: Sep 2007
Location: GLOC, Ok
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
You are! You need to hurry up and get a couple of HAAS's....
We have three shops that do stuff for us. Two locations are pole barns with about 250k worth of machining centers in them. You guys can get pretty hillbilly at times.
We dont do anything on the razr, we used to do stainless bumpers for the Ranger & Sportsman, but they pulled the program bc the parts didnt have enought profit for them. So now its misc. brackets for assembly. What are you looking for?
We have three shops that do stuff for us. Two locations are pole barns with about 250k worth of machining centers in them. You guys can get pretty hillbilly at times.
We dont do anything on the razr, we used to do stainless bumpers for the Ranger & Sportsman, but they pulled the program bc the parts didnt have enought profit for them. So now its misc. brackets for assembly. What are you looking for?
12-10-2008, 02:43 PM
#6
Registered
Thread Starter
Join Date: Sep 2007
Location: GLOC, Ok
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
12-11-2008, 04:25 PM
#8
Drive to arrive alive!!!
Platinum Member
No EDM. We mainly machine parts for ourselves and don't use our machines to their full potential. Our VF-2 and VF-3YT mainly drill and tap holes. We do have the software for more advanced stuff though.
The SL30TB lathe w/live tooling actually gets used for some pretty cool stuff though.
The SL30TB lathe w/live tooling actually gets used for some pretty cool stuff though.
12-12-2008, 09:11 AM
#9
Registered
Thread Starter
Join Date: Sep 2007
Location: GLOC, Ok
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Gotta love high tech equipment now adays! If you guys ever need to look at jobing anything out, I would love to give you a quote. In times like these the more diversified you can be the better, in my opinion.
