American Custom Marine
#1
Registered
Thread Starter
Join Date: Sep 2003
Location: Newport, MI
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
American Custom Marine
I just want to give a huge thanks to Mike & Kenny @ ACM for finding and fixing my boat on such a short notice...I was having major problems with my steering that no one could figure out and these guys figured it out and I got my boat back to me in 2 days before a holiday weekend!! I would highly recommend this shop to anyone here in Michigan and especially in southeast Michigan if you need it done professionally and with reasonable pricing!!
www.americancustommarine.com
Thanks again guys!!
Todd
www.americancustommarine.com
Thanks again guys!!
Todd
#2
Registered
Join Date: Nov 2003
Location: Rochester, MI / Marco Island, FL
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
To add to that they are the shop that has stepped up and taken the work to the next level of customer satisfaction and quality if work! They are working on NAS-T right now and should have her back together after the marina accident of hitting the underwater piling. Ty have worked with every company to insure a speedy turn around to get her back in the water! I can't say enough about these guys! They also
Do paint, rigging, detailing, interiors, winter storage.... Everything! I highly reccomend them!
American Custom Marine
Do paint, rigging, detailing, interiors, winter storage.... Everything! I highly reccomend them!
American Custom Marine
#3
Registered
I agree! American Custom Marine built my 496 sea water pumps and even thou it was a smaller job, there was still a pride in workmanship that is second to none, which seems difficult to find anymore. Its wonderful to have things work perfect the first time. Thank you Mike and Kenny.
#4
I have been 2 the shop!!! U can eat off the floors!!!! hear'n noth'n but good things!!!! W/ all the bad crap that goes on in this industry, X 2 hear some good stuff!!!! Keep it go'n Mikey & Kenny!!!
#6
Registered
Join Date: Sep 2007
Location: Gaylord, Mi
Posts: 2,573
Likes: 0
Received 0 Likes
on
0 Posts
I have my bad stories and its very long. Let me say Mike and Ken helped me out in a huge way! The mechanic I had working on the boat went off the deep end. I went and got the boat and took it to ACM where they finished rigging new motors. We removed the drives and sent them out to the Bravos shop as they are B max drives and after ACM got involved the porcess went very smooth. One of the things I really like is the communication. In addition to that Ken must be a work aholic becasue that guy is at the shop from 7 am to 11 pm. They busted their butts for me and their rates are very fair esp w woking on performance boats where no two are alike. Finally, someone who runs their marine business like all service business should be run.
#7
Fast Priorty II Nor-Tech
Platinum Member
yea, next time you are there try eating at a table they would prefer that !!!!!!
#8
#10