This thread is a little slow
12-21-2009, 12:57 PM
#1
Registered
Thread Starter
Join Date: Aug 2007
Location: Destin, Fl
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
This thread is a little slow
SO...... Is anyone upgrading, rebuiding or redoing anything on their Hustler this winter? We all know what Rob (Strippoker388) is doing. 
12-22-2009, 12:20 PM
#4
VIP Member
I just finished polishing all my anodes and trim ones came out real good.
All the fiberglass gel in the cabin I buffed and waxed,even the potty
The counter top had some scratches in it.They came out,My beer bottle would even slide off it.
The diamond tread was a pain to polish.
Ck out the reflection of the buffer on the tool box.
Rob
All the fiberglass gel in the cabin I buffed and waxed,even the potty
The counter top had some scratches in it.They came out,My beer bottle would even slide off it.The diamond tread was a pain to polish.
Ck out the reflection of the buffer on the tool box.
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
12-22-2009, 12:57 PM
#5
before and after picks.
I spent a hour or 2 on them
They were very wavy,ruff casting I straighten them the best I could,belt sanded and cut down the mid section rounded the nose ,thinned the skeg a bunch,Since my boat was in paint for over a year I polished these in the spring and they got a little cloudy so I repolished them for a boat show coming up here.
Rob
I spent a hour or 2 on them
They were very wavy,ruff casting I straighten them the best I could,belt sanded and cut down the mid section rounded the nose ,thinned the skeg a bunch,Since my boat was in paint for over a year I polished these in the spring and they got a little cloudy so I repolished them for a boat show coming up here.Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
12-23-2009, 09:16 AM
#8
Platinum Member
Platinum Member
Join Date: Feb 2004
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
I just started polishing mine last weekend. But after reading this thread I am feeling a little pressure to stepup the pace. Rob, you set a very high bar. I could only wish I had the energy.
Merry Christmas, Happy Holidays All.
Terry
Merry Christmas, Happy Holidays All.
Terry
