Who has 32's? Pics, Power, mods?
01-24-2012, 02:31 PM
#14
Registered
Join Date: May 2004
Location: Pasadena,MD
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
32 Hustler
Forgot some pic's, yes there is rooster tail. With the 900's this is the fastest 32. The speed quoted by the red one for sale was unlikely and I don't believe Hustler would have rigged the steering on stand off blocks, on my boat the trim and steering cylinders were fabricated by Second Effort for my hull. The Hustler that broke the 100MPH mark had 650hp. motors and the best the factory could get out of it was 106 mph according to "Powerboat" This hull with 900hp's hit 117mph, @ 600 rpm below redline. These engines are not super charged, blower, nor turbocharged, just carburetors, built by Talon Marine in Landover,MD
Last edited by Katabatic; 01-24-2012 at 02:42 PM. Reason: added engine comments
01-24-2012, 07:09 PM
#15
Registered
Forgot some pic's, yes there is rooster tail. With the 900's this is the fastest 32. The speed quoted by the red one for sale was unlikely and I don't believe Hustler would have rigged the steering on stand off blocks, on my boat the trim and steering cylinders were fabricated by Second Effort for my hull. The Hustler that broke the 100MPH mark had 650hp. motors and the best the factory could get out of it was 106 mph according to "Powerboat" This hull with 900hp's hit 117mph, @ 600 rpm below redline. These engines are not super charged, blower, nor turbocharged, just carburetors, built by Talon Marine in Landover,MD
01-25-2012, 08:24 AM
#16
Registered
Join Date: May 2004
Location: Pasadena,MD
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Yes it is, how have you been? So, after you grow up you get rid of the little Hustler and get a 46' Skater with turbines? Boy I can't wait to grow up!
Last edited by Katabatic; 01-25-2012 at 08:30 AM.
01-25-2012, 01:30 PM
#17
Forgot some pic's, yes there is rooster tail. With the 900's this is the fastest 32. The speed quoted by the red one for sale was unlikely and I don't believe Hustler would have rigged the steering on stand off blocks, on my boat the trim and steering cylinders were fabricated by Second Effort for my hull. The Hustler that broke the 100MPH mark had 650hp. motors and the best the factory could get out of it was 106 mph according to "Powerboat" This hull with 900hp's hit 117mph, @ 600 rpm below redline. These engines are not super charged, blower, nor turbocharged, just carburetors, built by Talon Marine in Landover,MD
01-25-2012, 02:03 PM
#18
Platinum Member
Platinum MemberThread Starter
Did you see the late 80's 32 in the classified section a few months back? It said in ad it had 850hp with surface drives and ran around 120. It was all red and black.
Anyways how many of these 32 do you think there are in the US? I don't see many in the 90's. From what I had seen and read mine is prob one of the last built. Someone say they say a 97 but I have never seen one. Mine has the bolt on windscreen, composite/foat transom, and entire hull was vacuum baged when it was in the mold to equally push the resin in mat and lighten boat. Its also has power mcloede bolsters, and all white interier in cabin. Down fall is that I have stock 502mpi's but it ver reliable power. Runs 78 with 500hours on motors, everyday.
Anyways how many of these 32 do you think there are in the US? I don't see many in the 90's. From what I had seen and read mine is prob one of the last built. Someone say they say a 97 but I have never seen one. Mine has the bolt on windscreen, composite/foat transom, and entire hull was vacuum baged when it was in the mold to equally push the resin in mat and lighten boat. Its also has power mcloede bolsters, and all white interier in cabin. Down fall is that I have stock 502mpi's but it ver reliable power. Runs 78 with 500hours on motors, everyday.
