KNOT-RIGHT

In my search for a project cat. I discovered this hull.

http://secure.offshoreonly.com/geocl...php?a=2&b=3127

Can anyone comment on this or know this boat?
I have two 1000,s and Arnesons.
I have spoke to the owner it is a one owner.
It is 46 feet with a beam of I beleave 9.5 feet. Is this a shallow Tunnel?
Two steps also.

Whats your thoughts?

Dueclaws

Caveman-
I believe the 46' is a stretch version of the 35' Jag, so the tunnel should be similar: about 15.5" high x 52" wide at the transom.
Due

27daytona

Jerry. That should do everything that you ask of it. Should be a great way to get into a cat. Good luck. Doug

Byrdman

You nuts!!! I know all about doing these project boats! Do yourself a favor listen to me,buy a boat with the rigging all still there,including the canopies..they are easy to remove and or make 1/4 ones..what do you think this boat has been doing laying around..to hard to finish!! You have what it takes to finish 1 drives and motor...what about the ones lucky was talking about...there are plenty of cheap good big and small jags around!!!

thedonz

i second that and if ya were planning to spend 150k add that times 2 or 3 cause ya always spend atleast twice then what ya were thinking about spending. just in engins and drives your over 100k plus the rigging the instruments the trailer . that ainn't no 10,000k trailer but hey if ya havethe money the time and ya love it go for it we're all here to help ya out in anything we can . but remmber if ya normaly say the words like f #ck / god dam*t / son of a b*tch 5 times a day times that times 5 per word . good luck and keeps us posted. oh and a tow vechical umm 30,000k used unless ya have one cause a 350 won't do it

donz jr mike