28' maltese for sale 1974
#3
Registered
Thread Starter
Join Date: Jul 2007
Location: Middletown Delaware
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
I bought the boat from CA last year, put new tires and bearings on the triple axle trailer(hauled it 2700 mile no problem). the boat had sat for some time so I took it to a local marina to go over and fire it up. 8500 later I was on the water I'm told the compression is great 11:1 and produces around 400hp each motor. installed thumper exhaust swapt out the 800cfm carbs for 750's with electric chokes. needs upholstery due to age and not all of the gauges work. the cables will also need replaced on the trim tabs and outdrives. boat sounds nice and gets a lot of attention.