Magnum Pretending to be Cigarette
#31
Registered
Join Date: Jan 2008
Location: Hollywood Florida
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
whats up guys,when out yesterday all day and the boat started to run rough and when i got home took the spark plugs out and water came out from the hole, i know that it sounds like i blow a head gasket even that i check the oil and the oil looks ok with no water,
well i was waiting for this moment to start messing with the engines.
what heads do you guys recommend for my twin 350 engines??
what i have now are just plain steel heads with press on studs for the rockers, any advice anyone??? i always felt that my boat is not running with the rest of the magnums out there,knowing that i have twin 350 with stainless marine exhaust and bravo ones out drives and 23p stainless steel props and on the best day my boat saw 62 mph. on the gps. so i am going to take this opportunity to beef up the engines to see if i can get just a few mph. i am also aware of my drives are just a bit lower that they should be, and thats on the agenda as well. i am looking for 2 inch shorties lower units.
if any one here have any ideas please let me hear,i want to go 70 mph if possible,i know is not that fast but for me it would be the fastest
thank you members, wait to hear from someone soon
well i was waiting for this moment to start messing with the engines.
what heads do you guys recommend for my twin 350 engines??
what i have now are just plain steel heads with press on studs for the rockers, any advice anyone??? i always felt that my boat is not running with the rest of the magnums out there,knowing that i have twin 350 with stainless marine exhaust and bravo ones out drives and 23p stainless steel props and on the best day my boat saw 62 mph. on the gps. so i am going to take this opportunity to beef up the engines to see if i can get just a few mph. i am also aware of my drives are just a bit lower that they should be, and thats on the agenda as well. i am looking for 2 inch shorties lower units.
if any one here have any ideas please let me hear,i want to go 70 mph if possible,i know is not that fast but for me it would be the fastest
thank you members, wait to hear from someone soon
#37
Registered
Join Date: Jan 2008
Location: Hollywood Florida
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
well i am going to start with the heads(dart) and then i am putting some shorties lower units.
i witch i had the time and money and believe me it would be done a long time ago.
thank you guys
i witch i had the time and money and believe me it would be done a long time ago.
thank you guys
#38
Registered
Thread
Thread Starter
Forum
Replies
Last Post
Joe
General Boating Discussion
263
09-05-2007 08:35 AM
OSO News
Offshoreonly Industry News
0
07-02-2007 11:23 AM
Offshore Addiction
General Boating Discussion
24
01-09-2004 01:57 PM