Jmemoli

iTrader: (1)

sorry for the delay -
the chick was a maryland hottie watching the race , and decided to get a pic with my brother .
After the OC race , the hatches were doen , so i built the single engine hatch - much lighter -

TOASTY

great, thanks! Hope all is well

C

jeff1000man

I think I am going to go ahead and get a nice paint job done whle I have it apart also.

Discussing that with someone on this board known ad "the man" tomorrow about it.

RunninHotRacing163.1

Looking good . Keep up the good work!

jeff1000man

Oil cooler came in today. Should have some pics by the end of the week after the boat gets out of the fiberglass shop and will be ready for paint. I had a guy working on graphics, but I guess we will have to see.

Jmemoli

iTrader: (1)

JEff,
Thats the same cooler I ran -
the best place to attach it is to the top side of the bell housing -
Call Hardin Marine in Palm coast , Fla - they make the keith eickert brackets to mount it there .

jeff1000man

I am puting it on the stringer on the port side. I tried the other one on the bell housing and I really don't like it. The only issue is when you pull the engine back out, it is kind of messy, but I can live with that.

I am trying to doll up the bildge a little more than it used to be.

I really don't want to have to work on this boat anymore, it defeats its main purpose.

Jmemoli

iTrader: (1)

a ***** to mount , but once in its oh so nice

RunninHotRacing163.1

jeff1000man

Because I am supposed to be using it, not building it.