74 28ft Magnum Maltese Steering
#4
Registered
iTrader: (3)
Join Date: Sep 2008
Location: Bedford & Wolfeboro, NH
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
I recently completed this on my Magnum 27 Sport. I have Volvo 280 drives and use one PS pump, a Capilano helm and made a plate to retain my original Teleflex helm cover . . twin external rams.. the largest challenge will be building or locating brackets to fit the top of the Volvo drives.
Much of my build is in pictures on Donzi.net under the "talk about other boats" forum and the Time Flies thread.
There are pictures of the brackets I used on this thread:
http://www.offshoreonly.com/forums/m...-14-years.html
Note that the Volvo drives have one hollow bolt to feed oil to the top bearing, it is the forward right side bolt. This bolt should not be replaced with a solid bolt to secure the PS bracket.
I'll post some pics tomorrow night!
Happy to share any information that I can. Post me directly at [email protected]
Mario L.
Much of my build is in pictures on Donzi.net under the "talk about other boats" forum and the Time Flies thread.
There are pictures of the brackets I used on this thread:
http://www.offshoreonly.com/forums/m...-14-years.html
Note that the Volvo drives have one hollow bolt to feed oil to the top bearing, it is the forward right side bolt. This bolt should not be replaced with a solid bolt to secure the PS bracket.
I'll post some pics tomorrow night!
Happy to share any information that I can. Post me directly at [email protected]
Mario L.
Last edited by Mario L.; 10-17-2013 at 07:33 PM.