Anyone know a great, reputable drive guy?
#11
VIP Member
VIP Member
Where are you located? Dave at MDG handles 98% of everything on my Tiger, engines and drives are all done by him and they have never let me down.
#17
Registered
Join Date: Aug 2011
Location: Northern Virginia
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
I just had both of my outdrives serviced at Potomac Marine (a couple hundred yards up Neabsco Creek) late last month. It took a few days longer than originally promised, but I think that is the norm. Work was done by the book and everything seems to be in order as we tapped 80mph on our first trip out after the build...
#18
Registered
iTrader: (1)
Tony at c.m.s. racing engines. He has helped me with everything for 15 years. He has built several motors and drives for me with no blow ups or breaks infact I had taken a blower motor apart a few years after the motor was built and run very hard and the bearings looked the same as when we installed them! I was amazed! Very honest and reasonable. 410 335 2226
He also does top notch rigging as well.
He also does top notch rigging as well.