Windsheild for my 30 Motion!
#1
Registered
Thread Starter
Windsheild for my 30 Motion!
Hi All-
Well I have been doing some research for about six months on full wrap around windsheilds. I have been working with an OEM and finally think I came up with a nice windsheild for a 30 Motion. In the picutures the windsheild is just held on by a few bolts so it might look a little off. I had to make some measurements to finish the rest of the parts needed. I just thought I would show some before and after pictures.
Well I have been doing some research for about six months on full wrap around windsheilds. I have been working with an OEM and finally think I came up with a nice windsheild for a 30 Motion. In the picutures the windsheild is just held on by a few bolts so it might look a little off. I had to make some measurements to finish the rest of the parts needed. I just thought I would show some before and after pictures.
Last edited by Maritime_Eng; 09-29-2008 at 11:40 AM.
#4
VIP Member
VIP Member
Don - that looks OUTSTANDING! Really changes the look of the boat. Looking forward to seeing the final product. Plus its low enough not to affect access to the bow. Congrats - GREAT JOB!
#5
Registered
Thread Starter
Thanks! I really think this is going to work well. My last motion I had I built windscreens for it and was never really happy with them. The boat has a long way to go before its done but it should be a 1 of a kind when I am done.
#7
Registered
Thread Starter
The company I bought the windsheild from also gave me the part numbers needed to mount the windsheild to the boat. It has plastic inserts, washers, and nyloc nuts for the screws.
#10
Registered
Thread Starter