35 Flame boarding ladder and Wind flaps
#2
Registered
Join Date: May 2009
Location: Decatur, IL
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Wish I had a ladder I just use the trim tabs since they stick out pretty good. The only way a ladder would work on mine would be to mount on the top and store on the top. When I trim my drives all the way up (SCX drives ) they are very close to the fiberglass on the swim platform.
#6
Never Enough
Platinum Member
Join Date: Apr 2005
Location: .
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
I don't use a ladder either. Step on the tabs and have no problem. I have the bolt on permanent wind deflectors and they work great. I think I posted pictures last yr. If not I'll see if I can find a picture
#7
Registered
Join Date: May 2009
Location: Decatur, IL
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
The worst thing about this boat is where you tie the bouys if you put them where they are above on the picture your back corner will get dinged up on a dock eventually. I am adding pop up bouy cleats the round ones from livorsi somewhere about the middle of the back swim platform eliminate this problem. Also best to swap out the old Nordic cleats with newer ones that are taller.