Adam/302 Sport new boat
#11
Can You Hear Me Now??
Gold Member
Thread Starter
#12
Can You Hear Me Now??
Gold Member
Thread Starter
http://www.offshoreonly.com/classifi...o44140-en.html
I have to admit I am not a cat guy but if you want to fast they are pretty friggin sick.
I have to admit I am not a cat guy but if you want to fast they are pretty friggin sick.
#14
Rebuild the AT.
We have dialed in a couple boats to run 90mph on stock 525s and XRs. One of them now has 250 hours, and nothing but fluid changes. The other one hit a crab trap, so it's had a little drive work. Both of them full cabins and AC; but I'll admit we had to pull the generator out of the one with 250 hours to get the last couple ticks.
Punch the 525s out to 600/650HP, and build a solid set of XRs with some nice internals; and you will be all set.
We have dialed in a couple boats to run 90mph on stock 525s and XRs. One of them now has 250 hours, and nothing but fluid changes. The other one hit a crab trap, so it's had a little drive work. Both of them full cabins and AC; but I'll admit we had to pull the generator out of the one with 250 hours to get the last couple ticks.
Punch the 525s out to 600/650HP, and build a solid set of XRs with some nice internals; and you will be all set.
#15
Registered
iTrader: (2)
Rebuild the AT.
We have dialed in a couple boats to run 90mph on stock 525s and XRs. One of them now has 250 hours, and nothing but fluid changes. The other one hit a crab trap, so it's had a little drive work. Both of them full cabins and AC; but I'll admit we had to pull the generator out of the one with 250 hours to get the last couple ticks.
Punch the 525s out to 600/650HP, and build a solid set of XRs with some nice internals; and you will be all set.
We have dialed in a couple boats to run 90mph on stock 525s and XRs. One of them now has 250 hours, and nothing but fluid changes. The other one hit a crab trap, so it's had a little drive work. Both of them full cabins and AC; but I'll admit we had to pull the generator out of the one with 250 hours to get the last couple ticks.
Punch the 525s out to 600/650HP, and build a solid set of XRs with some nice internals; and you will be all set.
#17
Registered
agreed...you guys did great work on the powerplay. the AT would come out just as good. i would stick it out. if you started now, when would it be ready for the water?
#18
Registered