Almost a month...
05-08-2011, 07:40 AM
#21
Registered
Join Date: May 2005
Location: LOTO Performance Boat Center
Posts: 3,897
Likes: 0
Received 0 Likes
on
0 Posts
05-08-2011, 08:25 AM
#22
Registered
502 was only the cubic inches Andy. With 700+ hours on the boat, Big D and I figured I was probably only making about 390 per side out of the original 415 hp they had when new. So...if we estimate 780 total hp before, and look at appr. 1140 total now...Michelle is going to have to hold on tight.
05-08-2011, 10:34 AM
#24
Join Date: Jan 2010
Location: Gurnee IL
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
502 was only the cubic inches Andy. With 700+ hours on the boat, Big D and I figured I was probably only making about 390 per side out of the original 415 hp they had when new. So...if we estimate 780 total hp before, and look at appr. 1140 total now...Michelle is going to have to hold on tight.
05-08-2011, 04:00 PM
#25
Registered
Join Date: May 2005
Location: LOTO Performance Boat Center
Posts: 3,897
Likes: 0
Received 0 Likes
on
0 Posts
502 was only the cubic inches Andy. With 700+ hours on the boat, Big D and I figured I was probably only making about 390 per side out of the original 415 hp they had when new. So...if we estimate 780 total hp before, and look at appr. 1140 total now...Michelle is going to have to hold on tight.
I was talking a side
05-09-2011, 06:07 PM
#26
Warped & Twisted Member
Platinum Member
sommerwillbeflyinby
