750 In A 24
#11
Registered
Looks like Larry Yuerhs owns it. and His FB shows the boat too.
Did it have a for sale sing on it?(just asking Take it easy guys in advance)
#12
Registered
iTrader: (2)
Join Date: May 2012
Location: Gibraltar, MI
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
http://www.panteraboats.com/ownersga...atID=38&page=0
Looks like Larry Yuerhs owns it. and His FB shows the boat too.
Did it have a for sale sing on it?(just asking Take it easy guys in advance)
Looks like Larry Yuerhs owns it. and His FB shows the boat too.
Did it have a for sale sing on it?(just asking Take it easy guys in advance)
#15
I'm in the process of deciding exactly what to do for power for mine. I've been talking with my machinist about building a 540 around a dart block. Thinking 650hp or so.
Some times I think a nice, mild, 502/500ish hp mill would be more than enough but, then again, a badass 540 is tempting.
Some times I think a nice, mild, 502/500ish hp mill would be more than enough but, then again, a badass 540 is tempting.
#17
Registered
Join Date: Feb 2009
Location: MIAMI
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Think about short extension to move engine forward 12-18 inches...
Propped and throttled right with OLD stiff h41 helm and good rams, regular size merc/kiek tabs, this will handle as good as 28-30'!!
Jo can move the bulkhead forward if yours is standard deck cap.
It will be awesome, trust me, look at some pix on his site of "M-24"
Propped and throttled right with OLD stiff h41 helm and good rams, regular size merc/kiek tabs, this will handle as good as 28-30'!!
Jo can move the bulkhead forward if yours is standard deck cap.
It will be awesome, trust me, look at some pix on his site of "M-24"
Thread
Thread Starter
Forum
Replies
Last Post
mavrick10
General Boating Discussion
58
09-21-2004 12:46 PM