"bucket" race cleats seen on some Panteras
#1
"bucket" race cleats seen on some Panteras
Who makes/made the "bucket" or "cup" race cleats that Pantera has on some of the older boats? They are basically a small basin with a straight pin through them.
Thanks!
Thanks!
Last edited by Sydwayz; 05-05-2010 at 04:02 PM.
#2
Registered
#3
Registered
They no longer make the smaller ones, only the larger 4x8 ones. Marine machine no longer makes them either. Will at Phantom has a batch but the last he has, going to use on his boats but then will have to switch styles. I am looking for 4 of these also about 2x 4 inches. Anyone have any?
#5
Charter Member # 55
Charter Member
I have 3 of the smaller ones with the backing plates that I will sell. The smaller ones are 3"x 6" and large ones are 4" x 8". They were from my 28 Pantera. I replaced them with the large ones with the cleat in the middle. No corrosion, but have some chipping.
$75 for all 3 shipped to your door.
$75 for all 3 shipped to your door.
#9
Registered