more cabin pics please
#1
Registered
Thread Starter
Join Date: May 2004
Location: Severna Park, Maryland
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
more cabin pics please
I know I posted this yesterday but it was deleted somehow. So once again if anyone has any pics of their cabin 24 or 28 I would greatly appreciate them just trying to get some ideas. Also any pics of interior like carpet/ gauge set ups, or up close throttle pics stuff like that.
Thank you very much,
Mike
Thank you very much,
Mike
#5
Registered
Thread Starter
Join Date: May 2004
Location: Severna Park, Maryland
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Re: more cabin pics please
Pantera 24 do you have any pics of the dash/ interior.. What power do you have in your 28, and what kind of M.P.H.?
Thank you all...
Thank you all...
#7
Platinum Member
Platinum Member
Join Date: Aug 2003
Location: Florida
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Re: more cabin pics please
A few more at a different angle I did not get to finish interior completely yet, but all the vinyl on the sides was replaced with plush carpet.
#8
Registered
Join Date: Jun 2001
Location: Tulsa, OK, Grand, Beaver, LOTO
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
Re: more cabin pics please
Wow! I like the new "Integrated" dash! The hatches in the cabin are nice too. What's your boat got for power Jim? (I almost ordered a twin 340 hp small block with Pulse drive, then I bought VB's boat)
#9
Registered
Thread Starter
Join Date: May 2004
Location: Severna Park, Maryland
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Re: more cabin pics please
thank you jimjomack for posting pics that 28 looks gorgeous who's doing all the work and will there be cushions covering the compartments?
#10
Platinum Member
Platinum Member
Join Date: Aug 2003
Location: Florida
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Re: more cabin pics please
I have 2 502 EFI engines with CMI SS exhaust headers.I also added closed cooling after the engines were rebuilt. I will post a picture when I can. I raised the entire back of engine compartment and made a custom raised hatch to clear the exhaust. On twins with a high x dimension the original hatch will not fit. I do all the work myself in the winter months. I have the original cushions but I dont use them. They get stained easily and get mold during storage. I only take the vee berth cushions if I am going far and have to spend the night on the boat. I made the white hatch cover over the porta-potti as I installed a high port-potti which I foamed in place so it does not move around. The white hatch serves double as a table top also.
Last edited by jimjomack; 07-26-2004 at 07:25 PM. Reason: added another comment