Got my 380 up to 90mph yesterday!
Got my 380 up to 90mph yesterday!
01-19-2002, 11:48 AM
#3
Charter Member #30
Charter MemberThread Starter
Actually I probably didn't hit 80 just thought it was a attention getter!! Guess I got ya 
(fairings are
)
(fairings are
)
__________________
I have Steps & Bubbles!
I have Steps & Bubbles!
01-19-2002, 01:42 PM
#5
Charter Member
Charter Member
Join Date: Oct 2000
Location: Lake Orion, MI. USA
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
I got mine up to 70........degrees, I pulled it in my warehouse to do some work. I found the up trim switches don't work for the drives, must be a wiring problem. Also noticed that with the whipple on the starboard engine I might not be able to remove the battery without removing a trim pump 
. I also looked at the feasability of putting in valves on the sea strainers. Looks like it would be easier to pull an engine instead of all the upside down ass busting it would take otherwise. This I will most likely wait on.
Scott: I assume you were getting your wind faring finished up. You gonna post some pictures?
Ray
[ 01-19-2002: Message edited by: Raypanic ]
. I also looked at the feasability of putting in valves on the sea strainers. Looks like it would be easier to pull an engine instead of all the upside down ass busting it would take otherwise. This I will most likely wait on.Scott: I assume you were getting your wind faring finished up. You gonna post some pictures?
Ray
[ 01-19-2002: Message edited by: Raypanic ]
__________________
Ray
Ray
01-19-2002, 02:49 PM
#6
Charter Member #30
Charter MemberThread Starter
Ray,
No it was some touch up work on the bottom and a few items that were left open from last year.
I still don't own a good digital camera I need to buy one so I can take a few shots. The ones I had posted are a couple years old. I will be pulling both my motors and doing a few upgrades soon. (offshore mounts and head work). I will also install a GPS speedo,Optima batterys,boxes and spare prop holders.
[ 01-19-2002: Message edited by: Scott ]
[ 01-19-2002: Message edited by: Scott ]
No it was some touch up work on the bottom and a few items that were left open from last year.
I still don't own a good digital camera I need to buy one so I can take a few shots. The ones I had posted are a couple years old. I will be pulling both my motors and doing a few upgrades soon. (offshore mounts and head work). I will also install a GPS speedo,Optima batterys,boxes and spare prop holders.
[ 01-19-2002: Message edited by: Scott ]
[ 01-19-2002: Message edited by: Scott ]
__________________
I have Steps & Bubbles!
I have Steps & Bubbles!
01-19-2002, 07:26 PM
#7
Registered
Join Date: Feb 2001
Location: Big Rapids, MI
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Scott,
Just take pics with a regular camera and scan 'em in, they turn out just as good, that's how I've been doing my pics lately. My digital is a pain in the ass.
paul
Just take pics with a regular camera and scan 'em in, they turn out just as good, that's how I've been doing my pics lately. My digital is a pain in the ass.
paul
01-19-2002, 08:38 PM
#8
Charter Member
Charter Member
Join Date: Oct 2000
Location: Lake Orion, MI. USA
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
Or just take your film to K-mart and ask for the cd rom option. Then just pop it in the computer and change to .jpg's and up load - Ray
__________________
Ray
Ray
