7" or 11" tips?
#2
Registered
Just be careful about the bolt pattern. I had purchased a new set of 7" last year and when I went to install them the holes were off. I decided against drilling new holes and re-sold them.
#4
Registered
I don't recall where I bought them from. I know my 23 Conquest I changed out and I did buy them from Rex and they worked fine. But it had standard non-muffuler tips on it to start with.
#5
OSO Moderator
Charter Member
The Corsa tips use a std 3 bolt pattern. There were once 3 -340 Vypers here, and we replaced the Corsa tips on all 3. (12 tips in all) They all matched pretty well - as long as the factory guy was having a good day and drilled them correctly.
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
#6
jus roamn
Platinum Member
Hey BillR, did you guys use the straight cut tips and put the external flappers back on? I was going to buy the angle cut ones at first but I'm concerned about water reversion with the tips being so close to the waterline. Also were they from Eddie Marine or CP? Thanks for any input!
#8
Registered
Hey BillR, did you guys use the straight cut tips and put the external flappers back on? I was going to buy the angle cut ones at first but I'm concerned about water reversion with the tips being so close to the waterline. Also were they from Eddie Marine or CP? Thanks for any input!
I like having the flappers for added protection. The only time you can see them is when the boat is out of the water anyway.
#9
OSO Moderator
Charter Member
Hey BillR, did you guys use the straight cut tips and put the external flappers back on? I was going to buy the angle cut ones at first but I'm concerned about water reversion with the tips being so close to the waterline. Also were they from Eddie Marine or CP? Thanks for any input!
If you want tips, I know someone selling a set of 4 Eddie Marine slash cut tips w/ internal flappers. BRAND NEW - still in bag.
Part #100-08 $ 200 all 4
He also has a used (40 hours) set od 4 slash cut tips - no flappers
in good condition. $ 100 for 4
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
Last edited by BillR; 04-17-2007 at 02:38 PM.
#10
jus roamn
Platinum Member
Hey Bill,
Could you PM me the phone number for the guy with these tips? I was thinking more of the straight cut ones , but if you used angled ones without any problems, I might give them a try. Thanks again!
Could you PM me the phone number for the guy with these tips? I was thinking more of the straight cut ones , but if you used angled ones without any problems, I might give them a try. Thanks again!