34 vyper filler cushion
#31
Registered
I found all the p/n's on the Taco Metals' website but they don't sell retail. They referred me to WM; I gave WM the p/n's but when they quoted the prices they told me the shorter tube was NLA. Since the table was my only priority I didn't look any further for the short tube. If I need the second berth then I could alway get another long tube and have it cut down.
I just did a cut n paste to give you the p/n's.
I just did a cut n paste to give you the p/n's.
I thought the same, buy bigger and cut it down so it is 100% the correct length.
Appreciate the help, another project for the list!!!
#33
Registered
Hey Keith,
I bought the OEM parts for the table minus the table top (and short tube, no longer avlb). The tube is 76mm or 2.99" od., tapered on the bottom to fit in the base and a collar on the top for the table support to clip onto.
Taco Metals p/n's
Table Support Z20-3161PCS76MM
Table Column Z76-7143VEL13.25-1
Table Column Z76-9271VEL28.63-1
Table Base Z10-4080BLY76MM
Flush Mount Table Base Plug Z10-4016DEL76MM-A
Special order through West Marine.
I bought the OEM parts for the table minus the table top (and short tube, no longer avlb). The tube is 76mm or 2.99" od., tapered on the bottom to fit in the base and a collar on the top for the table support to clip onto.
Taco Metals p/n's
Table Support Z20-3161PCS76MM
Table Column Z76-7143VEL13.25-1
Table Column Z76-9271VEL28.63-1
Table Base Z10-4080BLY76MM
Flush Mount Table Base Plug Z10-4016DEL76MM-A
Special order through West Marine.
-table
-table column long
-table column short (longer but I will cut down)
Still need the rest.....
#36
Registered
Also, I bought the table top off eBay, same one they used in the boats. Emailed them direct and offered 100 shipped and they accepted. They now have 7 left, just an FYI. I bought one of the poles from them too for 40.
Then, the piece in the floor, the bracket that attaches to the table top. And the plug that covers the hole in the floor piece when not in use I got online from Fisheries Supply in WA. 140, free shipping.
The other needed pole was an eBay find too for 35.
So for all pieces to do the table and bed EXCEPT for the cushion cost me 315 bucks. Not too bad.
Last edited by Pwraddr; 04-06-2013 at 07:28 AM.
#37
Registered
Join Date: Dec 2010
Location: Edmonton, AB. Canada
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Just curious about drilling the hole in the floor...also, thought you were building, not buying the table top. Thanks for the info...located and ordering a table top ASAP!
#38
Registered
I intended on building the table top, but when I saw them on eBay even at the asking price of 124 bucks I knew my time and materials would be way more than that so I just bought one. ( also, I think it matches the counter top in the boat already but not real good with colors )
My wife moved this task up on the priority list so I think I should be complete within a month. ( no it won't take a month but need a free Saturday afternoon )
#40
Registered
Do you get to Detroit often? We can definetly do beers!
PS. What is your name, LOL.