280 Procharger COMPLETE!
#1
Gold Member
Gold Member
Thread Starter
Join Date: Sep 2011
Location: Scottsburg, IN
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
280 Procharger COMPLETE!
Finally have everything installed on the boat. Going to start it tonight for the first time and test it this weekend.
#2
Registered
Platinum Member
Right on!
I bet the weekend seems like years away...lol.
We have ours home now as well and can't wait to get out!
Josh, post some pics of your ride!!
I bet the weekend seems like years away...lol.
We have ours home now as well and can't wait to get out!
Josh, post some pics of your ride!!
#5
Gold Member
Gold Member
Thread Starter
Join Date: Sep 2011
Location: Scottsburg, IN
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
It ran good despite that i couldnt run it at full boost because it kept blowing off the intake coupler to the intercooler. Im goin to buy a full set of T bolt clamps for the system and that should fix the problem. I did hit 70 on the gps running flat with no trim at all. I thought that was impressive concerning. It only did 67 before with it trimed as much as i could without blowing the prop out.
#6
Registered
Platinum Member
It ran good despite that i couldnt run it at full boost because it kept blowing off the intake coupler to the intercooler. Im goin to buy a full set of T bolt clamps for the system and that should fix the problem. I did hit 70 on the gps running flat with no trim at all. I thought that was impressive concerning. It only did 67 before with it trimed as much as i could without blowing the prop out.
#7
Gold Member
Gold Member
Thread Starter
Join Date: Sep 2011
Location: Scottsburg, IN
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
LOL. I was in the process of doing so and it blew the pipe off. anytime the rpm got around 4500 and started building boost it would blow off the intercooler pipe.
#9
Gold Member
Gold Member
Thread Starter
Join Date: Sep 2011
Location: Scottsburg, IN
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts