PQ Legend SLS
#11
Member #9
Charter Member
Oh, no I did not buy mine from Rod. Evidently he just took on PQ ever since Tim the owner from Riverview Marine in Illinois died last year.
__________________
Member of the Liquid Jungle
Member of the Liquid Jungle
#12
Registered
Join Date: May 2001
Location: Minnesota
Posts: 1,485
Likes: 0
Received 0 Likes
on
0 Posts
Bruce told me he would save me a seat in the Pantera if I decide to leave it at home
Brian
#13
Registered
Join Date: Mar 2001
Location: Holland, MI 49424
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
There are just a few points that I would like to make.
260 SLS - there will be one at the Grand Rapids Show this weekend. If you don't mind the drive and would like to see the layout.
Storage - please keep in mind that there is extra storage in the floor of both the 260 SX & the SLS.
The storage in the SX is often hidden, but the lay in carpet and many people don't dig that far at the show. Both port and stbd sides have floor storage.
260 SLS - Motor Options: There was some time where we could not put the bigger motor in the 260 SLS because of the change in the motors from Merc. However everything is taken care of and we just produced one with a 496 Mag.
Hope this helps.
Mandi
260 SLS - there will be one at the Grand Rapids Show this weekend. If you don't mind the drive and would like to see the layout.
Storage - please keep in mind that there is extra storage in the floor of both the 260 SX & the SLS.
The storage in the SX is often hidden, but the lay in carpet and many people don't dig that far at the show. Both port and stbd sides have floor storage.
260 SLS - Motor Options: There was some time where we could not put the bigger motor in the 260 SLS because of the change in the motors from Merc. However everything is taken care of and we just produced one with a 496 Mag.
Hope this helps.
Mandi
#14
Registered
Thread Starter
Thanks Mandi I'll be at the show in GR on Saturday. Matter of fact I don't recall the gentleman's name there at PQ that I talked with but he had e-mailed photo's of the boat to me. By the way I've trying to get a hold of Rick Gimmal for a couple weeks on dropping some stuff off to get reworked but I'm having no luck in a return call. I'm going to be in GR on this Thursday and wanted to swing by to drop off my rear seat and sun-deck plus tour the factory. Can you have him call me?? He's got my number.
Thanks Brian Newton
Thanks Brian Newton