hydromotive props
05-16-2005, 07:08 PM
#1
Registered
Thread Starter
Join Date: Jan 2005
Location: CAPE CORAL, FLORIDA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
hydromotive props
Anyone intrested in my hydromotive 26 rh and lh propellers, Iam taking them off my 32 fountain as Iam installing prochargers and need to turn bigger blades, switching to 30 bravo1's.
05-16-2005, 07:33 PM
#2
Platinum Member
Platinum Member
Join Date: Sep 2002
Location: Lake St. Clair
Posts: 1,935
Likes: 0
Received 0 Likes
on
0 Posts
Re: hydromotive props
I may be interested - how much you want for them? are they stock untouched? what speeds were you seeing before & after the prochargers?
05-17-2005, 07:14 AM
#3
Registered
Thread Starter
Join Date: Jan 2005
Location: CAPE CORAL, FLORIDA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: hydromotive props
$500 for both, they are untouched by myself, I have had boat for 4 months and Iam the second owner. asked previous owner and said untouched also
specs
current
502's (stock) running 77 mph(gps) @5000rpm
drives turning in and toed in 1/4 in
hopeful specs with lavorsi prochargers, intercoolers
620hp spinning 30p bravo1
upgraded xr gears, fresh top ends and stock exhaust
90-92mph is the target #'S
specs
current
502's (stock) running 77 mph(gps) @5000rpm
drives turning in and toed in 1/4 in
hopeful specs with lavorsi prochargers, intercoolers
620hp spinning 30p bravo1
upgraded xr gears, fresh top ends and stock exhaust
90-92mph is the target #'S
05-24-2005, 07:03 AM
#6
Registered
Re: hydromotive props
If the props are more than 18 months old then they have a standard shaft hub welded in. They would have to have the standard shaft hub machined out and an XR hub welded in. This is a common modification to these props. The new stock of Hydromotive props use a square bore which will accommodate any of the Mercury square hubs, including the XR hub.
Matt
Matt
06-02-2005, 12:48 PM
#7
Registered User
Join Date: Dec 2002
Location: Midwest
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Re: hydromotive props
Are the props still for sale? If so, how can i contact you?
here is my EMail[email protected]
here is my EMail[email protected]
Last edited by WheelerDealer; 06-02-2005 at 12:51 PM.
06-05-2005, 08:08 AM
#8
Registered
Thread Starter
Join Date: Jan 2005
Location: CAPE CORAL, FLORIDA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: hydromotive props
Yes they still are for sale email me a [email protected]
Last edited by briana; 06-06-2005 at 05:09 AM.
