Hey Julie, I need a prop
#1
Registered
Thread Starter
Join Date: Oct 2005
Location: Ankeny IA
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Hey Julie, I need a prop
Looking for advice, and to try a prop...
I have a 24' Four winns Liberator, that had a 350 mag before pushing a 17P merc stainless prop at 4600 RPM.
With my new motor (383, guessing around 400HP) it blows this prop out at any RPM's higher than 4600-4700. The motor I have is built for max torque at about 4500, max HP at about 5500.
Some advice I am getting from others who have drove the boat are saying a 23P is what I want. That sounds too big for me. I am thinking 21P, and am open to types. (I want stainless, of course)
Thanks
James
I have a 24' Four winns Liberator, that had a 350 mag before pushing a 17P merc stainless prop at 4600 RPM.
With my new motor (383, guessing around 400HP) it blows this prop out at any RPM's higher than 4600-4700. The motor I have is built for max torque at about 4500, max HP at about 5500.
Some advice I am getting from others who have drove the boat are saying a 23P is what I want. That sounds too big for me. I am thinking 21P, and am open to types. (I want stainless, of course)
Thanks
James
#3
Registered
Thread Starter
Join Date: Oct 2005
Location: Ankeny IA
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hey Julie, I need a prop
Thanks Julie,
I went to the marina I spoke of, and he highly recommended the new vensura prop. He had his 21 loaner out, so he gave me the 19. He also did not recommend the Mirage plus for small blocks or alphas???? He said a Laser would be better suited for my boat. (He has seen it, but not seen it run)
I will let you know how the trials go. Whats your thought on the Vensura's?
Thanks
James
I went to the marina I spoke of, and he highly recommended the new vensura prop. He had his 21 loaner out, so he gave me the 19. He also did not recommend the Mirage plus for small blocks or alphas???? He said a Laser would be better suited for my boat. (He has seen it, but not seen it run)
I will let you know how the trials go. Whats your thought on the Vensura's?
Thanks
James
#6
Registered
Platinum Member
Join Date: Feb 2004
Location: BELGIUM EUROPE
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hey Julie, I need a prop
We repropped the same boat a few weeks ago... but with BB 454 365 Hp... So more or less same Hp's as yours
22 P 4 Blade Bravo 1 was the best prop... Changed complete riding of the boat (acceleration, midrange & topspeed)
Topspeed was 58-60 Mph @ 4900-5000 RPM
If you want more RPM's (+ 300) , just go by a 22 P labfinished
22 P 4 Blade Bravo 1 was the best prop... Changed complete riding of the boat (acceleration, midrange & topspeed)
Topspeed was 58-60 Mph @ 4900-5000 RPM
If you want more RPM's (+ 300) , just go by a 22 P labfinished
Thread
Thread Starter
Forum
Replies
Last Post
HyperBaja
General Boating Discussion
3
09-25-2002 04:11 PM