Hydamotive props
10-04-2006, 04:36 PM
#1
Registered
Thread Starter
Join Date: Mar 2005
Location: Las Vegas NV
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Hydromotive props
How much difference is there to an older hydromotive to a new one? The prop that was given to me is said to be 6+ yrs old.
Last edited by Mike Paula; 10-05-2006 at 08:25 PM.
10-04-2006, 06:59 PM
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: Hydamotive props
There can be hub and difusser ring differences.
I don't know the exact time lines. A expert hydromotive propeller facility or Hydromtive themselves will be able to answer those questions.
I don't know the exact time lines. A expert hydromotive propeller facility or Hydromtive themselves will be able to answer those questions.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
10-05-2006, 06:32 AM
#4
Registered
Thread Starter
Join Date: Mar 2005
Location: Las Vegas NV
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hydromotive props
The reason I asked is that Everyone who talks about sizing of hydromotive props always states them in Even numbers ...24p 26p 28p.... This one clearly says 23p in the part number. But no where on the prop do I see it stamped.
Last edited by Mike Paula; 10-07-2006 at 09:44 AM.
10-05-2006, 07:02 AM
#5
Registered
Re: Hydamotive props
Hydromotive props are available in each inch of pitch, unlike most Mercury props which are only available in every other inch. A 23 Quad IV is quite common.
From a performance perspective there is no difference from a 6 year old Quad IV and a new one.
Matt
From a performance perspective there is no difference from a 6 year old Quad IV and a new one.
Matt
Thread
Thread Starter
Forum
Replies
Last Post
raiseyourdrive
General Boating Discussion
8
09-15-2004 08:23 AM
