Go Back   Offshoreonly.com > Technical > Prop Talk


OSO Sponsor
NorTech
OSO Sponsor

Advertiser

Advertiser


Reply
 
 
 
 
Thread Tools
Old 11-16-2006, 08:47 PM   #1
TOTAL ADDICTION
VIP Member
 
nordic95's Avatar
 
Join Date: Aug 2005
Location: New Jersey
Posts: 1,710
32' Fountain Fever
New prop

I just purchased a 1988 206ls Formula.It has a 320 HP small block and bravo one drive.The boat came with a 19 bravo one prop but it goes past the recommended rpm range of 4800 rpms.I tried a 23 mirage and it would only spin 4400 rpm and hated to come up out of the hole.I need a 21 mirage or what would work in a four or five blade?

Thanks Nordic95
nordic95 is offline   Reply With Quote
Old 11-17-2006, 08:42 AM   #2
Registered
 
throttleup's Avatar
 
Join Date: Mar 2002
Location: St. Petersburg, FL
Posts: 5,141
Throttle Up Propellers Manufacturer
Re: New prop

Was the 23P a Mirage or a Mirage Plus I would try a 21P of the same.

Julie
throttleup is offline   Reply With Quote
Sponsored Links
Old 11-17-2006, 02:15 PM   #3
Offshoreonly Advertiser
Offshoreonly Advertiser
 
bbladesprops's Avatar
 
Join Date: Jun 2003
Location: Princeton, Wisconsin
Posts: 2,402
Smile Re: New prop

Another option that I think may work very well is to rework the 23 you have now. Depending on its vintage and the the specifics of how it gets on plane, we may be able to make it the fastest propeller.

Stay away from the 5 blade props. As far as a 4blade, 21 Revolution 4! We have them to test with if you wish.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
bbladesprops is offline   Reply With Quote
 
 
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Prop Blow out, What Prop? Sten Lift Problem Sick Stinger Velocity 9 02-07-2008 12:39 PM
Prop Shop Question Damaged prop FlyFast General Q & A 1 08-06-2004 11:22 AM
Prop rotation (Prop Class 101) boatinbill General Boating Discussion 6 07-26-2002 10:58 AM
I need an XR prop hub kit for the 1.25"prop shaft MIKEHTMSR24 General Boating Discussion 3 07-22-2002 04:18 PM
I need an XR prop hub kit for the 1.25"prop shaft MIKEHTMSR24 General Q & A 0 07-22-2002 02:40 PM


All times are GMT -5. The time now is 03:27 PM.


Copyright 2011 OffShoreOnly. All rights reserved.

Search Engine Optimization by vBSEO 3.2.0