Rcolter

Boat is a 1996 35 single step with 502 power. Performance report says they ran a 27. But should I be running a rounded ear or a more clever looking prop. I am running the round ear and with alot of trim I get a little over 5000 rpms.

Rebel_Heart

My 2001 single step came with a hydro quad !Vs, 26s. I think it turned 4900.

Rcolter

What speeds were you seeing?

throttleup

Your boat was most likely delivered and dialed in with semi-cleavers, Hydromotive props.

Julie

Rebel_Heart

With the 502s, the Reggie report was 75. I never quite saw that number in real world application.

Carder

My 1999 with HP500's came with 28p QIV's,...but the boat also had factory-installed stellings ext. boxes. The "Reggie Propaganda Page" reported 85 mph @ 5350. I got about the same on good days. Carder

Rebel_Heart

Do you still have same motors? Those are good speeds with 500s! Must be something to those extension boxes.

Carder

Tyler rebuilt both engines this winter, up to 585 hp and similar torque ft/lbs.... but I have had engines and drives grenading every time I get a chance to see what it is capable of running... I am thinking 91 to 93 with the upgrades and Julie dialing in the props... I am going out tonight to trial them.
Carder

Rebel_Heart

Keep us posted. What broke on your last drive? And, you broke the drive trying to get on plane?

Carder

Bearings grenaded, but not getting up on plane. I was slowly testing at 3500, then 4000, then 4500... I stopped to inspect and the stbd. shut down. When I got it restarted there was a 'wurring" sound coming from the drive when I put it in gear... so I took it back to Tyler. Tomorrow he is reinstalling the drive. The props from Julie rocked up to the 4500 mark...
i am very curious what happens beyond that and will respond ASAP. Carder