stern lift from cleavers?
#11
VIP Member
VIP Member
Have you tried swapping the prop rotation?
That will affect the stern lift.
I think 3 blades will be faster on top if that is your ultimate goal.
I've been told to prop for peek HP +200 -0.
That will affect the stern lift.
I think 3 blades will be faster on top if that is your ultimate goal.
I've been told to prop for peek HP +200 -0.
__________________
Patrick
Patrick
#13
Registered
Thread Starter
Join Date: Feb 2007
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
the boat has so much traction I'm not worried about the mid range, I mean it planes at 2100.... I am aiming for 80mph, if you think a 3 blade cleaver is right... hydromotive may just be selling what they have on the shelf, he was pushing rough water, riding on the "tops" performance, no worry with this boat either. I have done some nuts rides, catching the tops in sick conditions. ive got my gps working so will have baseline numbers tomorrow
#15
Registered
Thread Starter
Join Date: Feb 2007
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
I like the layout of the superboat too it seems conducive to intimate positions with its low profile. You guys are gonna hate this I have water in one crankcase, Ill be posting over somewhere this ones a stumper it holds 15 lbs in the crankcase cant figure where its coming in not the oil cooler