2004 22 velocity, 300x prop and set up?
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
Believe it or not we used to run Trophy small hub props on those boats with 3 litre motors.
But now cowil is right. 14.75" diameter cupped Bravo 1 props with vent holes are the ticket.
But now cowil is right. 14.75" diameter cupped Bravo 1 props with vent holes are the ticket.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
#4
Registered
Thread Starter
Join Date: Nov 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I'm running a 24 pitch bravo right now thats been labbed by a local company (probably not the best job) and can only get about 6200 rpm's. The limiter is at 6800, so do i drop to a 22 pitch or would it be worth it to swap the 1:62 ratio lower unit for a 1:75. any major speed gains?
Thread
Thread Starter
Forum
Replies
Last Post
Cincinnati Race
General Racing Discussion
13
06-21-2004 04:31 PM