What parts to install a Mirage Plus 48-13704 onto a TRS?
#1
Registered
Thread Starter
Join Date: Jan 2008
Location: Mooresville, NC
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
What parts to install a Mirage Plus 48-13704 onto a TRS?
I just realized that the rear washer was not with a Mirage Plus 48-13704 that I bought. The splined forward section is there but nothing else.
What additional parts/part numbers do I need to buy to get this to bolt up to my TRS correctly? Is all I need the rear washer or is there more to it? Thanks.
What additional parts/part numbers do I need to buy to get this to bolt up to my TRS correctly? Is all I need the rear washer or is there more to it? Thanks.
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
Your missing a #849501Q1 bushing inside the insert!
It keeps the prop centered ic case anything is loose.
We have them for $20
I can't believe your dealer didn't know that. Actually, I can believe it.
Brett
It keeps the prop centered ic case anything is loose.
We have them for $20
I can't believe your dealer didn't know that. Actually, I can believe it.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]