Need some help dialing in
#1
Registered
Platinum Member
Thread Starter
Need some help dialing in
My buddy bought my 2003 Powerquest Silencer with a zero hour fresh rebuilt 496 with the Raylar 525 HO with E-top headers.
Boat is a 28 single step, engine is 560 hp and needs to spin at 5300-5350 rpm.
Here are some prop test results:
5200-5300 rpm @ 72.5 mph 26 labbed Bravo 1 with .70 cup (max cup)
4800 rpm @ 70.5 mph 28 Bravo 1 with no work.
5200-5300 rpm @ 73 mph 26 Bravo 1 with no work.
Can 400 rpm be gained labbing a Bravo 1?
Would a 28 Bravo 1 labbed prop with no cup be the answer?
Any ideas??
Thanks Mike
ps: I wasn't in the boat to verify any under/ over trim..
Boat is a 28 single step, engine is 560 hp and needs to spin at 5300-5350 rpm.
Here are some prop test results:
5200-5300 rpm @ 72.5 mph 26 labbed Bravo 1 with .70 cup (max cup)
4800 rpm @ 70.5 mph 28 Bravo 1 with no work.
5200-5300 rpm @ 73 mph 26 Bravo 1 with no work.
Can 400 rpm be gained labbing a Bravo 1?
Would a 28 Bravo 1 labbed prop with no cup be the answer?
Any ideas??
Thanks Mike
ps: I wasn't in the boat to verify any under/ over trim..
Last edited by verbi69; 06-05-2011 at 07:57 PM.