mirage props
#14
Offshoreonly Advertiser
Offshoreonly Advertiser
Looks a little like a small round ear Mach but the hub is different and Mach's had their name cast in. Unless it is a very early one that I have never seen.
The vibro peen 29P looks like the work of the Spinelli Bros. but they always put their name on the prop too. Plus this isn't like any Geometry I remember from their repertoire.
I'm not sure what it is but I would bet it is a early representation of what the model became since there isn't any cast markings on it.
If we had it our shop in our hands, I might be able to get you a better answer.
Thank you,
Brett
The vibro peen 29P looks like the work of the Spinelli Bros. but they always put their name on the prop too. Plus this isn't like any Geometry I remember from their repertoire.
I'm not sure what it is but I would bet it is a early representation of what the model became since there isn't any cast markings on it.
If we had it our shop in our hands, I might be able to get you a better answer.
Thank you,
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Last edited by bbladesprops; 01-10-2012 at 03:31 PM. Reason: spelling
#15
Registered
Thread Starter
Join Date: Jul 2011
Location: mirabel,qc
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
Looks a little like a small round ear Mach but the hub is different and Mach's had their name cast in. Unless it is a very early one that I have never seen.
The vibro peen 29P looks like the work of the Spinelli Bros. but they always put their name on the prop too. Plus this isn't like any Geometry I remember from their repertoire.
I'm not sure what it is but I would bet it is a early representation of what the model became since there isn't any cast markings on it.
If we had it our shop in our hands, I might be able to get you a better answer.
Thank you,
Brett
The vibro peen 29P looks like the work of the Spinelli Bros. but they always put their name on the prop too. Plus this isn't like any Geometry I remember from their repertoire.
I'm not sure what it is but I would bet it is a early representation of what the model became since there isn't any cast markings on it.
If we had it our shop in our hands, I might be able to get you a better answer.
Thank you,
Brett
1995 pq 27,496ho/whipple +.030'',bravo xr,approx 600hp
thanks,
jack
#16
Offshoreonly Advertiser
Offshoreonly Advertiser
Looks like the diameter may be a touch smal but, every prop that "may" work is worth trying.
We'll learn something.
Brett
We'll learn something.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
#17
Registered
If your running a 3 blade right now on a PQ then almost any 4 blade is going to slow you down a couple mph assuming the 3 blade is the right pitch for your boat and it sounds like it is. That 4 blade prop in question might be good for cruising or pulling a skier or tube. I would keep it if I were you .. Never know when you might bang up your prop.
Chris
Chris
Last edited by Blueabyss; 01-13-2012 at 03:40 PM. Reason: See below...lol...
#19
Registered
Thread Starter
Join Date: Jul 2011
Location: mirabel,qc
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
If your running a 3 blade right now on a PQ then almost any 4 blade is going to slow you down a couple mph assuming the 3 blade is the right pitch for your boat and it sounds like it is. That 4 blade prop in question might be good for cursing or pulling a skier or tube. I would keep it if I were you .. Never know when you might bang up your prop.
Chris
Chris
jack