Prop Question
#11
Charter Member # 55
Charter Member
magnum 350 , i have a 24 cuddycabin also with a 350 mag,running a 23p quicksilver 3 blade @5200rpm@52 mph.i am looking at going with a revolution 4 blade 23p to bring rpm down .you should have no problem turning a 23p 3 blade.mirage plus would be my bet for top end gain
Most boats with a 1.5 ratio drive will run about 65mph at 5200rpms with a 23 Mirage Plus.
#12
Registered
Join Date: Apr 2009
Location: Denmark and hopefully some place nice
Posts: 1,852
Likes: 0
Received 1 Like
on
1 Post
The prop to run is the 17" or 18" Mirage+ or 17" Revolution 4, you want to spin that motor around 4600-4700 for good top end combined with good efficiency. Alse, albeit I'm a huge fan if the LaserII, you need more diameter for thrust on this hull. For a good blend of top speed and good efficiency, I'd start with a 18"M+, but that will be down to personal preference. No matter what, the number to shoot for, is 47-49 mph, depending on conditions ect. Maybe it does not sound like a lot, but you are at the boats limit with that power.
#13
Registered
Join Date: Dec 2011
Location: evansville indiana
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
so what your saying some one could have put the wrong gears in the upper drive,so i will have to go even more pitch or change gear set?